Single-phase safety transformers, 2TTB type
Purpose and design
Single-phase safety transformers are designed to supply electrical appliances with low safety voltage. The standard design of the single- phase transformer provides fixing by means of angle brackets screwed to the core. Transformers may have several primary and secondary windings. The windings may provide additional voltage tap changers on the supply and load sides. The connection terminals can be located on one or both sides of the transformer. By agreement, transformers can be supplied in IP 23, IP 44 and IP 54 enclosures with power cable routing through cable glands.
Note:
Upon agreement, we can manufacture a non- standard device with the required technical parameters.
The manufacturer reserves the right to make changes to the parameters due to technical product developments.
Technical Standards |
EN/IEC 61558-2-6 |
Power |
from 2,0 to 10 kVA |
Primary voltage |
up to 1000 V |
Secondary voltage |
up to 50 V |
Frequency |
50 / 60 Hz |
Protection class |
IP00 |
Insulation class |
F (155°C) |
Ambient temperature |
from -25°C to +40°C |
Environment class |
C1/E0 – land based, C2/E1 – mining and offshore |
Protection class |
class I |
Mounting |
by means of brackets |
Typ | Sn | A | B | C | D | E | F | Masa | Wykonanie |
[kVA] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [kg] | ||
2TTB-2,0 | 2,0 | 178 | 140 | 230 | 128 | 114 | 11*15 | 15,5 | A |
2TTB-2,5 | 2,5 | 178 | 152 | 230 | 128 | 126 | 11*15 | 18,1 | A |
2TTB-3,0 | 3,0 | 200 | 165 | 265 | 140 | 133 | 11*15 | 20,6 | A |
2TTB-3,5 | 3,5 | 200 | 177 | 265 | 140 | 145 | 11*15 | 24,4 | A |
2TTB-4,0 | 4,0 | 200 | 192 | 265 | 140 | 160 | 11*15 | 28,1 | A |
2TTB-5,0 | 5,0 | 240 | 163 | 380 | 200 | 125 | 11*15 | 30,5 | B |
2TTB-6,3 | 6,3 | 240 | 178 | 380 | 200 | 140 | 11*15 | 36,3 | B |
2TTB-7,5 | 7,5 | 240 | 193 | 380 | 200 | 155 | 11*15 | 42,0 | B |
2TTB-8,0 | 8,0 | 280 | 183 | 440 | 240 | 141 | 11*15 | 44,8 | B |
2TTB-10 | 10 | 280 | 193 | 440 | 240 | 151 | 11*15 | 53,2 | B |